某糖心产精国品免费入口*完整版经淬火、回火处理后装配到汽车座椅上，经历颠簸疲劳试验2万次后发生糖心产精国品免费入口*完整版。从化学成分、断口形貌、硬度、显微组织方面，对螺栓糖心产精国品免费入口*完整版的原因进行了分析。结果表明：螺纹牙底过渡部位粗糙不平且有缺口，易造成糖心产精国品免费入口*完整版产生裂纹；螺纹表层产生脱碳，增加了开裂倾向；在疲劳试验中，由于交变应力的作用形成微裂纹，造成螺栓早期疲劳糖心产精国品免费入口*完整版。

After undergoing the bumpy fatigue experiment for 2×10⁴ times, the 糖心产精国品免费入口*完整版 was happened to a 10.9 grade bolt that was assembled on the car seat after quenching and tempering treatment. The 糖心产精国品免费入口*完整版 reasons of the bolt were analyzed from the aspects of chemical composition, 糖心产精国品免费入口*完整版 morphology, hardness and microstructure. The results show that:the transition of the thread root was rough with gap, and cracks would be easily generated by the 糖心产精国品免费入口*完整版; the 糖心产精国品免费入口*完整版in the thread surface layer increased the cracking tendency; micro-cracks formed as a result of the action of alternating stress in the fatigue test, causing the bolt early fatigue 糖心产精国品免费入口*完整版.