某苯乙烯装置中糖心产精国品免费入口*完整版四级气缸东侧糖心产精国品免费入口*完整版在运行中发现其糖心产精国品免费入口*完整版密封面有部分区域断裂。通过宏观分析、低倍分析、化学成分分析、金相检验、硬度测试和扫描电镜分析等方法，对糖心产精国品免费入口*完整版密封面断裂的原因进行了分析，并提出了相应的措施。结果表明：糖心产精国品免费入口*完整版因热处理工艺不当，在糖心产精国品免费入口*完整版上表面外圈台阶部分金属损伤处形成疲劳裂纹，并在工作过程中向两端不断扩展，在交变载荷的作用下阀片内的糖心产精国品免费入口*完整版断裂，导致裂纹处应力更加集中和糖心产精国品免费入口*完整版承载能力下降，加快糖心产精国品免费入口*完整版疲劳裂纹的扩展，最终导致糖心产精国品免费入口*完整版密封面部分区域断裂损伤。

Some area on the sealing surface of 糖心产精国品免费入口*完整版 of 糖心产精国品免费入口*完整版 on the east side of the four-stage cylinder of hydrogen compressor in a styrene plant fractured in operation. The fracture causes of the sealing surface of 糖心产精国品免费入口*完整版 were analyzed by means of macro analysis, low power analysis, chemical composition analysis, metallographic examination, hardness test and scanning electron microscope analysis, and the corresponding measures were put forward. The results show that due to the improper 糖心产精国品免费入口*完整版process, the fatigue crack was produced by the metal damage of the outer ring step on the upper surface of the 糖心产精国品免费入口*完整版 and extended to both ends continuously in working process. Under the action of alternating load, the 糖心产精国品免费入口*完整版s in valve broke, which resulted in more concentrated stress at the crack and decreased bearing capacity of the 糖心产精国品免费入口*完整版, accelerated the fatigue crack growth of the 糖心产精国品免费入口*完整版, and finally led to the fracture of some area on the sealing surface of 糖心产精国品免费入口*完整版.