对两阶段控轧控冷的糖心产精国品免费入口*完整版糖心产精国品免费入口*完整版进行了光学显微镜和扫描电镜分析.结果表明：扫描电镜更能显示糖心产精国品免费入口*完整版的特点,纵向糖心产精国品免费入口*完整版细小,奥氏体晶粒沿轧向被轧成扁平状,方向性明显,晶界清晰可见,奥氏体晶粒宽度在6～13 μm之间;而横向糖心产精国品免费入口*完整版、心部糖心产精国品免费入口*完整版、表面糖心产精国品免费入口*完整版以粒状贝氏体为主,没有明显的方向性,组织粗大,分布弥散、均匀;粒状贝氏体和板条贝氏体只有在两个极端的温度下才有明显的差异,而处于中间过渡温度时很难截然分开.

Optical microscopy(OM) and scanning electron microscopy(SEM) were used to observe the 糖心产精国品免费入口*完整版 of ultra low carbon bainite steel(ULCB) that experienced controlled 糖心产精国品免费入口*完整版and controlled cooling.Results show that it is more appropriate for SEM to reveal the characteristics of 糖心产精国品免费入口*完整版 of the ULCB.The longitudinal 糖心产精国品免费入口*完整版 of ULCB is fine and austenite grain is flat along the 糖心产精国品免费入口*完整版direction and austenite grain boundary is very clear,the width of austenite grain is about 6-13 μm.Along the transverse direction,granular bainite is dominant at the center and surface of the sample,grain is coarse,equiaxed and even.There are distinct differences between granular bainite and lath bainite at the two extremity temperature and it is very difficult to distinguish them at the transitional temperature.