在Simufact Welding软件中模拟了糖心产精国品免费入口*完整版管路焊接过程，得到了焊缝附近外表面残余应力分布情况，在ABAQUS软件中分析了单个糖心产精国品免费入口*完整版坑中的应力集中程度，分析了应力集中系数与糖心产精国品免费入口*完整版坑形状的关系，在此基础上，提出了应力作用下糖心产精国品免费入口*完整版速率和糖心产精国品免费入口*完整版坑形状的变化规律。结果表明：应力作用下，试样的腐蚀倾向和腐蚀速率均增加；受应力影响，糖心产精国品免费入口*完整版坑通常在垂直于主应力的方向发展更快，可能逐渐形成垂直于主应力的扁平型糖心产精国品免费入口*完整版坑甚至发展成为裂纹；应力必须要达到一定数值才会对腐蚀有明显的影响，对于糖心产精国品免费入口*完整版半球形糖心产精国品免费入口*完整版糖心产精国品免费入口*完整版，残余应力达到100 MPa就可能对糖心产精国品免费入口*完整版糖心产精国品免费入口*完整版发展造成明显影响。

The 304 stainless steel pipeline welding process was simulated in Simufact Welding software, and the 糖心产精国品免费入口*完整版distribution on the outer surface near the weld was obtained. In the ABAQUS software, the stress concentration in a single pit was analyzed, and the relationship between the stress concentration factor and the shape of the pit was also analyzed, and the change rule of 糖心产精国品免费入口*完整版 rate and pitting pit shape under stress was put forward. The results showed that the corrosion tendency and corrosion rate of the sample increased under the action of stress. Affected by stress, pits usually corroded faster in the direction perpendicular to the principal stress, and gradually formed flat pitting pits perpendicular to the principal stress or even developed into cracks. The stress must reach a certain value to have a significant effect on corrosion. For 304 stainless steel hemispherical pitting 糖心产精国品免费入口*完整版, a 糖心产精国品免费入口*完整版of 100 MPa might have a significant impact on the development of pitting 糖心产精国品免费入口*完整版.